Soundmatters SUBstageWall Bracket Bedienungsanleitung PDF herunterladen

4.4”

16.0”

Upper Bracket

Lower Bracket

Rubber Bushing Rubber Bushing

Note: When mounted, the bottom edge of the

SUBstage will be about 1-5/16” below the bottom

edge of the lower bracket.

SUBstage 250/100

Wall-Mount Screw Hole Template

for SSWB1 Mounting Bracket Kit

Note: When mounted, the top edge of the SUBstage will be

about 9/16” above the top edge of the upper bracket.

IMPORTANT WARNING: This bracket assembly MUST be

screwed solidly into wooden studs. Use this bracket ONLY if

you can screw into wooden studs.

WARNING: Make sure all pictures/etc. are well secured to

the wall as they may vibrate loose and rattle.

Pro Tuning Tip: Listen and tweak the settings for crossover,

volume and phase BEFORE nal wall-mounting. Use the foam

end caps from the packaging to temporarily wedge the unit

into approximate position behind a chair

or sofa. Note, once unit is wall-mounted,

it will have to be UN-mounted to change

these settings

soundmatters international

tel: 775 981.1460

fax: 775 981.1465

www.soundmatters.com

1 2 3 4

SUBstage 250/100 1

Inhaltsverzeichnis

Seite 1 - SUBstage 250/100

4.4” 16.0” Upper BracketLower BracketRubber Bushing Rubber BushingNote: When mounted, the bottom edge of the SUBstage will be about 1-5/16” below the

Seite 2

4.4” 16.0” Upper BracketLower BracketRubber Bushing Rubber BushingNote: When mounted, the bottom edge of the SUBstage will be about 1-5/16” below the

Seite 3

Read this before you beginIMPORTANT: Because the SUBstage generates a tremendous amount of low-frequency energy, this bracket assembly MUST be screwed

Seite 4

Read this before you beginIMPORTANT: Because the SUBstage generates a tremendous amount of low-frequency energy, this bracket assembly MUST be screwed